Are you competent to operate a chainsaw safely?
Inevitably, some on-farm trees will have blown down following Storm Barra. Why not check out advice on operating a chainsaw safely on the Teagasc Forestry website page, before considering any clean-up activities? John Casey, Teagasc Forestry Development Officer provides chainsaw guidance here
The Teagasc National Farm Survey indicates that about 6.5% of all injuries, in the Agriculture & Forestry sector, are chainsaw or wood related indicating that approximately 120 serious injuries occur each year. Self-employed farmers, farm workers and contractors are particularly at risk.
Training in the safe use of the chainsaw
If you need to use a chainsaw to fell a tree on a regular basis, then you should have completed an accredited chainsaw training course and successfully completed the assessment suitable for the chainsaw work to be done. It is essential that these courses meet the standards laid down by City & Guilds NPTC, LANTRA, or equivalent courses which would meet such standards as laid down by QQI (Quality and Qualifications Ireland) formerly FETAC.
Chainsaw courses with various levels of training are available. For example, a basic chainsaw course covering the felling of small trees will be up to five days in duration. Shorter courses, which only cover chainsaw maintenance and cross cutting of felled timber are also available. Such short courses do not demonstrate the techniques required for felling trees safely. Therefore, you should discuss your particular training requirements with an accredited chainsaw training provider beforehand. Persons undergoing chainsaw training must be adequately supervised.
Farmers who wish to use a chainsaw for such tasks as clearing fallen branches and pruning trees to maintain clearance for machines on their land may not need to complete full certified chainsaw training but would be strongly advised to do so.
Use Personal protective equipment
To protect against serious life threatening injuries, it is very important that suitable protective clothing and equipment is worn when using a chainsaw, no matter how small the job. Modern personal protective equipment (PPE) is easy to wear, long lasting and could prevent death or serious long term injury. It is important to understand that PPE doesn’t protect you against falling trees. Chainsaw operators should refer to the manufacturer’s handbook for safety instructions and advice.
The following safety equipment should be used:
- Safety Helmet (to conform to EN 397), suitable eye protection (Visor to EN 1731 or safety glasses to EN 166) and ear defenders (EN 352)
- Chainsaw gloves with protective pad on the back of the left hand, leg protection incorporating clogging material (EN 381-7)
- Safety boots with steel toecaps and a good grip (EN 381/345)
- Non-snag close-fitting outer clothing
- Chainsaw trousers (EN 381-5) No personal protective equipment can ensure 100% protection against cutting by a hand-held chainsaw.
- A first aid kit should be readily available, including large wound dressing.
EN refers to European Standards, meaning the equipment has meet specified safety requirements.
If you intend to operate a chainsaw at work, you must ensure that:
- a risk assessment on the work to be done is carried out before commencing the work
- you are competent or alternatively have successfully completed a chainsaw training course including an assessment which are suitable to the type of chainsaw work planned
- you wear the Personal Protective Equipment necessary for chainsaw work activities
- any person working for you in connection with chainsaw and tree felling work activities is also competent and wearing appropriate PPE. Don’t compromise on these essential safety requirements. Otherwise, you may be at risk of a serious accident to yourself or others.
See more from Teagasc Forestry on Trees damaged after Storm Barra
The Teagasc Forestry Department issues an article on a Forestry topic every Friday here on Teagasc Daily
Subscribe to: Forestry e-News